Protocols/MSNP/Scenarios/WebTV: Difference between revisions
(Created page with "Convert from markdown, plus archived URLs largely moved: <pre> **Due to the current lack of sufficient sources for WebTV info pertaining to Messenger, this page won't be upda...") |
Animadoria (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
<span id="authentication"></span> | |||
= Authentication = | |||
< | For MSNP versions < 8, on receiving a server-side subsequent <code>USR</code> (<code>USR MD5 S</code>), instead of hashing the password locally, WebTV/MSNTV clients delegate the hashing to a WTVP (WebTV Protocol) service on <code>wtv-passport:/messengerlogin</code> where it sends the MD5 challenge and email (split into the username and domain parts). The service then returns the challenge response on a successful lookup of the email being a valid Microsoft account (note that WebTV/MSNTV subscriber accounts and Microsoft accounts/Passports were separate from each other). The fact the service does not send the password at all in the request hints that passwords were assumed to be stored in cleartext and were retrieved from Microsoft’s databases as such. | ||
The same <code>wtv-passport</code> service is used for MSNP8 connections as well, but is assumed to accept and return different data, and we have yet to get information on how that works. | |||
''TODO: Logs of request and responses of official <code>wtv-passport</code> service.'' | |||
<span id="identification"></span> | |||
= Identification = | |||
On real hardware, it’s been observed that WebTV build 2.8 (MSN TV) sends a <code>CVR</code> after logging in: | |||
<pre>CVR (TrID) 0x0409 webtv 2.8 MIPS msntvim 2.8 msntv</pre> | |||
It identifies the client as <code>msntv</code> version 2.8, and the OS as <code>webtv</code> with the same version. It also identifies the running architecture as MIPS, with the client library being identified as <code>msntvim</code>. We’ve yet to determine if older builds (2.5 - 2.7) send this on real hardware as well. It’s been known that the 2.5 version of the WebTV Viewer doesn’t send any <code>CVR</code>s but the reason for this is unknown. | |||
<span id="webtvmsntv-first-commands"></span> | |||
= WebTV/MSNTV-first commands = | |||
<span id="ims"></span> | |||
== <code>IMS</code> == | |||
<code>IMS</code> is a WebTV/MSNTV-first MSNP command with little documentation on its resulting behavior. So far it’s been determined that it was introduced by MSNP3, and the only (surviving) mentions of it reside in [http://web.archive.org/web/20070609031946/http://msnpiki.msnfanatic.com/index.php/MSNP8:Miscellaneous#Disabling_Instant_Messaging archives] of [http://web.archive.org/web/20100817050916/http://msnpiki.msnfanatic.com/index.php/Command:IMS MSNPiki] (along with an [http://web.archive.org/web/20080423201511/http://msnpiki.msnfanatic.com/index.php/Command:IMS earlier archive] of the individual page on it that erroneously refers to it as <code>ILM</code> in the title, initially written by “Leadpumper”; the correction was added in by “BiM”), with the first [http://web.archive.org/web/20070218124123/http://msnpiki.msnfanatic.com/index.php?title=MSNP8:Miscellaneous&action=history mention] being written by a user named “MrData” around February 2006. | |||
<code>IMS</code> toggles whether a user can send <code>XFR</code>s for switchboards and receive <code>RNG</code>s or not. Its inferred usage is when a WebTV user doesn’t want to be pestered by any users wanting to message them, although we’ve only seen this command being triggered by WebTV Viewer 2.5 after an undetermined amount of idle time. The desktop MSN Messenger clients on the other hand don’t even mention the command in the binary strings. | |||
<code>IMS</code> only requires two parameters: the TrID, and a value of either <code>ON</code> or <code>OFF</code>, corresponding to the ability of whether the user can create switchboards and be invited to them (<code>ON</code> for yes, <code>OFF</code> for no). The response contains three parameters: the TrID, a number which has only been observed as <code>0</code> for the time being (this can possibly be another flag), and the value the user specified for turning on/off switchboard usage. An example of the request and corresponding response is shown below: | |||
<pre>>>> IMS (TrID) ON | |||
<<< IMS (TrID) 0 ON</pre> | |||
The behavior that results from a user setting <code>IMS</code> to <code>OFF</code> has so far been undocumented completely, but we assume that <code>XFR</code>s are simply ignored and <code>RNG</code>s aren’t sent to the user at all (with normal errors being sent to inviters). | |||
The behavior that results from a user setting | |||
Revision as of 14:42, 6 July 2022
Authentication
For MSNP versions < 8, on receiving a server-side subsequent USR (USR MD5 S), instead of hashing the password locally, WebTV/MSNTV clients delegate the hashing to a WTVP (WebTV Protocol) service on wtv-passport:/messengerlogin where it sends the MD5 challenge and email (split into the username and domain parts). The service then returns the challenge response on a successful lookup of the email being a valid Microsoft account (note that WebTV/MSNTV subscriber accounts and Microsoft accounts/Passports were separate from each other). The fact the service does not send the password at all in the request hints that passwords were assumed to be stored in cleartext and were retrieved from Microsoft’s databases as such.
The same wtv-passport service is used for MSNP8 connections as well, but is assumed to accept and return different data, and we have yet to get information on how that works.
TODO: Logs of request and responses of official wtv-passport service.
Identification
On real hardware, it’s been observed that WebTV build 2.8 (MSN TV) sends a CVR after logging in:
CVR (TrID) 0x0409 webtv 2.8 MIPS msntvim 2.8 msntv
It identifies the client as msntv version 2.8, and the OS as webtv with the same version. It also identifies the running architecture as MIPS, with the client library being identified as msntvim. We’ve yet to determine if older builds (2.5 - 2.7) send this on real hardware as well. It’s been known that the 2.5 version of the WebTV Viewer doesn’t send any CVRs but the reason for this is unknown.
WebTV/MSNTV-first commands
IMS
IMS is a WebTV/MSNTV-first MSNP command with little documentation on its resulting behavior. So far it’s been determined that it was introduced by MSNP3, and the only (surviving) mentions of it reside in archives of MSNPiki (along with an earlier archive of the individual page on it that erroneously refers to it as ILM in the title, initially written by “Leadpumper”; the correction was added in by “BiM”), with the first mention being written by a user named “MrData” around February 2006.
IMS toggles whether a user can send XFRs for switchboards and receive RNGs or not. Its inferred usage is when a WebTV user doesn’t want to be pestered by any users wanting to message them, although we’ve only seen this command being triggered by WebTV Viewer 2.5 after an undetermined amount of idle time. The desktop MSN Messenger clients on the other hand don’t even mention the command in the binary strings.
IMS only requires two parameters: the TrID, and a value of either ON or OFF, corresponding to the ability of whether the user can create switchboards and be invited to them (ON for yes, OFF for no). The response contains three parameters: the TrID, a number which has only been observed as 0 for the time being (this can possibly be another flag), and the value the user specified for turning on/off switchboard usage. An example of the request and corresponding response is shown below:
>>> IMS (TrID) ON <<< IMS (TrID) 0 ON
The behavior that results from a user setting IMS to OFF has so far been undocumented completely, but we assume that XFRs are simply ignored and RNGs aren’t sent to the user at all (with normal errors being sent to inviters).